Tutorial Unlock Modem CDMA HUAWEI EC-325 / EC-321

Tutorial ini saya dapatkan dari slah satu sebuah forum khusus repair phone.

Software yang di butuhkan :
1. BitPim v1.0.7 Freeware untuk membaca SPC
2. Cdma Workshop v3.4.1 Demo
3. Manual Tutorial Unlock

Kita mulai dari tahap PERTAMA

Anda Harus mengetahui SPC ( Service Provider Code ) Dengan Software BitPim v1.0.7
Sebelum Mengetahui Harus Install Dulu Driver Modem agar Kedetsi Oleh PC
Setelah Driver Terinstall dan Terkoneksi Ke Komputer Silahkan konfigurasi dulu ke : My Computer -> Manage -> Device Manager

Kemudian Klik : Properties
Pengaturan Perhatikan Gambar :

 Pada ADVANCED Port Number di ganti ke : 2

 Kemudian Jalankan BitPim v1.0.7

 Pilih Yes

Pada Phone wizard pilih
di “Phone Model Setting” window select “Carriers” as “Other”, “Manufacturers” as “Other” and “Models” as “Other CDMA phone”. Klik Next

Di “Communication Port Setting” windows you will see all the available ports, Pilih COM2 port. On selecting COM2 port you can see Datacard information under “Port Detail”

Now in BitPim go to “View” and select “View Filesystem”. This will add one more option in left pane. Select that new option “Filesystem”, on middle pane click on + symbol to open navigate to “nvm” directory. Right pane shows the system file available in that directory. Double click on “nvm_0002” file and it will show the content

Write down the number highlighted in yellow color, this is SPC code and it could be different in your case. Just write down this 6 digit no somewhere. Step 1-6 were done only to obtain this SPC code.

 Now it’s time to unlock your Datacard. Run “CDMA Workshop” software that you downloaded. On “Main” tab select COM2 at “COM settings” then click “Connect” button. It will show connected message in status bar. Now click “QCDM” button and it will read information of device

Go to “Security” tab and enter SPC code in “SPC/ User Lock” option and press SPC then select “Send” option. If your SPC is correct then it will show “SPC is correct. Phone unlocked” message

 

Now we are in important step. Go to “Other” tab and under “R-UIM’s config” select “R-UIM if avail”*** and press “Write” button. If writing process is successful then it will show message. Close “CDMA Workshop” software it show message, click yes and you are done
 

 

Untuk yang mau download softwarenya saya sediakan link dibawah ini

BitPim 1.0.7 Downloads:

• Windows 2000/XP/Vista/7
• Linux RPM
• Mac OS X 10.3

CDMA Workshop Demo >>Download<<

 

Sumber : www.hubpages.com
Dan telah ditest oleh forum.djawir.com